Program Application Form

Use the following form to apply for the Certified Collision Repair program. Before you apply, please read the program guide and be sure you are able to meet all of the qualification criteria.

- Step 1 of 4

PART ONE - APPLICANT INFORMATION

Company name

CCR_Q001 *

Enter your company name

Doing business as:

CCR_Q002

Enter DBA name (if different than company name)

Company's address

CCR_Q003 *

Number, street

CCR_Q004

Address line 2

CCR_Q005 *

City

CCR_Q006 *

Province

CCR_Q007 *

Postal Code

CCR_Q008 *

Country

Phone:

CCR_Q009 *

Business phone

CCR_Q010

Direct phone

Contact person:

CCR_Q011 *

First, last

Email:

CCR_Q012 *

Email address

Website:

CCR_Q013

Website / URL

Click Next to continue to Part Two - Facility and Business Standards

Save and Resume Later

PART TWO - GENERAL FACILITY & BUSINESS STANDARDS

Applicant is a full-time business in a permanent structure at a fixed location?

CCR_Q014 *

Facility operates during normal business hours, ie 8:30 am to 5:30 pm?

CCR_Q015 *

Facility has a currently valid Garage Liability Policy?

CCR_Q016 *

Facility has a current Commercial General Liability insurance policy with min $2M coverage?

CCR_Q017 *

Facility meets all applicable federal, provincial, and municipal acts, regulations, and standards, including health and safety?

CCR_Q018 *

Applicant can provide proof of proper disposal of environmentally hazardous materials as required by applicable environmental laws?

CCR_Q019 *

Facility provides a written lifetime limited warranty?

CCR_Q020 *

Facility has a documented CSI/customer feedback process?

CCR_Q021 *

Facility maintains a clean and orderly customer service area including reception and restrooms?

CCR_Q022 *

Facility maintains a secure vehicle storage area?

CCR_Q023 *

Click Next to Continue to Part Three - Training

Save and Resume Later

PART THREE - TRAINING

I-CAR Training:

I-CAR Canada Gold Class Recognition achieved?

CCR_Q024 *

Certified Level: At least one tech has successfully completed I-CAR BRZ02 MIG Brazing?

CCR_Q025 *

Certified + Aluminum Level: At least one tech has successfully completed I-CAR ALI01 or FOR06 Structural Repair training course?

(Select N/A if you are not applying for Certified + Aluminum Level)

CCR_Q026 *

Certified + Aluminum Level: At least one tech has successfully completed I-CAR WCA03 or WCA05 Aluminum GMA (MIG) Welding Certification?

(Select N/A if you are not applying for Certified + Aluminum Level)

CCR_Q027 *

Training - Personnel:

For each technician, please provide technician name, trade, level attained, and ITA ID number:

CCR_Q028A *

Technician 1 name (first / last)

CCR_Q028B *

Technician 1's trade (choose appropriate from drop-down list)

Technician 1 Level

CCR_Q028C *

Apprentice
C of Q

CCR_Q028D *

Technician 1 ITA ID#

Add a second technician?

CCR_Q029 *

YES
NO, done with technicians

CCR_Q030A *

Technician 2 name (first / last)

CCR_Q030B *

Technician 2's trade (choose appropriate from drop-down list)

Technician 2 Level

CCR_Q030C *

Apprentice
C of Q

CCR_Q030D *

Technician 2 ITA ID#

Add a third technician?

CCR_Q031 *

YES
NO, done with technicians

CCR_Q032A *

Technician 3 name (first / last)

CCR_Q032B *

Technician 3's trade (choose appropriate from drop-down list)

Technician 3 Level

CCR_Q032C *

Apprentice
C of Q

CCR_Q032D *

Technician 3 ITA ID#

Add a fourth technician?

CCR_Q033 *

YES
NO, done with technicians

CCR_Q034A *

Technician 4 name (first / last)

CCR_Q034B *

Technician 4's trade (choose appropriate from drop-down list)

Technician 4 Level

CCR_Q034C *

Apprentice
C of Q

CCR_Q034D *

Technician 4 ITA ID#

Add a fifth technician?

CCR_Q035 *

YES
NO, done with technicians

CCR_Q036A *

Technician 5 name (first / last)

CCR_Q036B *

Technician 5's trade (choose appropriate from drop-down list)

Technician 5 Level

CCR_Q036C *

Apprentice
C of Q

CCR_Q036D *

Technician 5 ITA ID#

Add a sixth technician?

CCR_Q037 *

YES
NO, done with technicians

CCR_Q038A *

Technician 6 name (first / last)

CCR_Q038B *

Technician 6's trade (choose appropriate from drop-down list)

Technician 6 Level

CCR_Q038C *

Apprentice
C of Q

CCR_Q038D *

Technician 6 ITA ID#

Add a seventh technician?

CCR_Q039 *

YES
NO, done with technicians

CCR_Q040A *

Technician 7 name (first / last)

CCR_Q040B *

Technician 7's trade (choose appropriate from drop-down list)

Technician 7 Level

CCR_Q040C *

Apprentice
C of Q

CCR_Q040D *

Technician 7 ITA ID#

Add an eighth technician?

CCR_Q041 *

YES
NO, done with technicians

CCR_Q042A *

Technician 8 name (first / last)

CCR_Q042B *

Technician 8's trade (choose appropriate from drop-down list)

Technician 8 Level

CCR_Q042C *

Apprentice
C of Q

CCR_Q042D *

Technician 8 ITA ID#

Add an ninth technician?

CCR_Q043 *

YES
NO, done with technicians

CCR_Q044A *

Technician 9 name (first / last)

CCR_Q044B *

Technician 9's trade (choose appropriate from drop-down list)

Technician 9 Level

CCR_Q044C *

Apprentice
C of Q

CCR_Q044D *

Technician 9 ITA ID#

Add an tenth technician?

CCR_Q045 *

YES
NO, done with technicians

CCR_Q046A *

Technician 10 name (first / last)

CCR_Q046B *

Technician 10's trade (choose appropriate from drop-down list)

Technician 10 Level

CCR_Q046C *

Apprentice
C of Q

CCR_Q046D *

Technician 10 ITA ID#

Click Next to continue to Part Five - Basic Shop Requirements

Save and Resume Later

PART FIVE - BASIC SHOP EQUIPMENT REQUIREMENTS

Facility has plastic repair system (eg: airless, chemical, hot air)?

CCR_Q047 *

Facility has headlamp alignment system?

CCR_Q048 *

Facility has above ground lift with minimum 6,000 lb capacity?

CCR_Q049 *

Facility has 200 amp / 220 volt MIG/MAG welder, minimum 35% duty cycle?

CCR_Q050 *

Facility has frame rack or dedicated fixture bench with appropriate anchoring and pulling capabilities?

CCR_Q051 *

Facility has electrical or hydraulic equipment capable of making simultaneous, multiple body, or structural pulls?

CCR_Q052 *

Facility has tools to remove, replace, and reinstall steering and suspension components, engines and drive train units, or has proof of a qualified sublet provider?

CCR_Q053 *

Facility has ability to conduct a four-wheel alignment through computer printout, or has proof of a qualified sublet provider?

CCR_Q054 *

Facility has pressurized spray booth equipped with a respirator system that meets all current federal, provincial, and regional requirements?

CCR_Q055 *

Facility has means of cleaning and recycling paint waste?

CCR_Q056 *

CCR CERTIFIED SHOP QUESTIONS

Facility has spray booth with forced drying capabilities?

CCR_Q057 *

Facility has OEM approved refinish system?

CCR_Q058 *

Facility uses R134a or R1234yr refrigerant recovery/recycling system or has proof of a qualified sublet provider?

CCR_Q059 *

Facility has corrosion protection equipment and consumables to restore corrosion protection?

CCR_Q060 *

Facility has access to OE repair procedures and proof of compliance?

CCR_Q061 *

Facility uses an electronic p-page estimating system?

CCR_Q062 *

Facility has a 220 volt, 3-Phase Inverter-Type Squeeze type Resistance Spot Welder (STRSW) capable of 600lbf (270 daN) clamp force and 10,000 amps at electrodes?

CCR_Q063 *

Facility has a pulse MIG welder with silicon-bronze MIG brazing capabilities?

CCR_Q064 *

Facility utilizes an electronic 3-D measuring system with a current data subscription?

CCR_Q065 *

Facility has a documented Quality Assurance system?

CCR_Q066 *

Facility has a dent removal system/pulling system for steel panels that contains a stud welder, stud pins, and washers, wiggle wire and pulling attachments?

CCR_Q067 *

Facility possesses electronic diagnostic tools able to assess fault codes for pre and post repair vehicle diagnostic scans and proof of calibrations, or has proof of a qualified sublet provider?

CCR_Q068 *

ADDITIONAL QUESTIONS FOR CCR CERTIFIED + ALUMINUM LEVEL APPLICANTS:

(Answer N/A if not applying for CCR Certified + Aluminum level)

Facility maintains a separate and isolated aluminum repair space?

CCR_Q069 *

Facility has dedicated aluminum dust extraction system with wet mix technology or a dry vacuum system using compressed air only, at a low cfm rating (less than 10 cfm) with no electric input that captures aluminum dust, fines and particles at the source and removes them to a disposable bag meeting the appropriate safety certifications?

CCR_Q070 *

Facility has designated set of aluminum-specific tools containing all required hand tools per manufacturer specifications system?

CCR_Q071 *

Facility has (220v) Pulse MIG Welder specifically for aluminum components?

CCR_Q072 *

Facility has dedicated aluminum dent extraction system containing an aluminum stud welder, heat gun, pyrometer, aluminum hammers, and dent extraction systems?

CCR_Q073 *

Facility has specialized aluminum Self-Pierce Rivet (SPR) gun that meets or exceeds manufacturer specifications?

CCR_Q074 *

CERTIFICATION

CCR_Q075 *

I hereby certify that all answers I have provided herein are true and accurate to the best of my knowledge

CCR_Q076 *

Name of person completing application (first / last)

Save and Resume Later

Your form entry has been saved and a unique link has been created which you can access to resume this form.

Enter your email address to receive the link via email. Alternately, you can copy and save the link below.

Please note, this link should not be shared and will expire in 30 days, after which your form entry will be deleted.

Copy Link

Email *

Program Application Form

PART ONE - APPLICANT INFORMATION

Company name

Doing business as:

Company's address

Phone:

Contact person:

Email:

Website:

Click Next to continue to Part Two - Facility and Business Standards

PART TWO - GENERAL FACILITY & BUSINESS STANDARDS

Applicant is a full-time business in a permanent structure at a fixed location?

Facility operates during normal business hours, ie 8:30 am to 5:30 pm?

Facility has a currently valid Garage Liability Policy?

Facility has a current Commercial General Liability insurance policy with min $2M coverage?

Facility meets all applicable federal, provincial, and municipal acts, regulations, and standards, including health and safety?

Applicant can provide proof of proper disposal of environmentally hazardous materials as required by applicable environmental laws?

Facility provides a written lifetime limited warranty?

Facility has a documented CSI/customer feedback process?

Facility maintains a clean and orderly customer service area including reception and restrooms?

Facility maintains a secure vehicle storage area?

Click Next to Continue to Part Three - Training

PART THREE - TRAINING

I-CAR Training:

I-CAR Canada Gold Class Recognition achieved?

Certified Level: At least one tech has successfully completed I-CAR BRZ02 MIG Brazing?

Certified + Aluminum Level: At least one tech has successfully completed I-CAR ALI01 or FOR06 Structural Repair training course?

Certified + Aluminum Level: At least one tech has successfully completed I-CAR WCA03 or WCA05 Aluminum GMA (MIG) Welding Certification?

Training - Personnel:

For each technician, please provide technician name, trade, level attained, and ITA ID number:

Add a second technician?

Add a third technician?

Add a fourth technician?

Add a fifth technician?

Add a sixth technician?

Add a seventh technician?

Add an eighth technician?

Add an ninth technician?

Add an tenth technician?

Click Next to continue to Part Five - Basic Shop Requirements

PART FIVE - BASIC SHOP EQUIPMENT REQUIREMENTS

Facility has plastic repair system (eg: airless, chemical, hot air)?

Facility has headlamp alignment system?

Facility has above ground lift with minimum 6,000 lb capacity?

Facility has 200 amp / 220 volt MIG/MAG welder, minimum 35% duty cycle?

Facility has frame rack or dedicated fixture bench with appropriate anchoring and pulling capabilities?

Facility has electrical or hydraulic equipment capable of making simultaneous, multiple body, or structural pulls?

Facility has tools to remove, replace, and reinstall steering and suspension components, engines and drive train units, or has proof of a qualified sublet provider?

Facility has ability to conduct a four-wheel alignment through computer printout, or has proof of a qualified sublet provider?

Facility has pressurized spray booth equipped with a respirator system that meets all current federal, provincial, and regional requirements?

Facility has means of cleaning and recycling paint waste?

CCR CERTIFIED SHOP QUESTIONS

Facility has spray booth with forced drying capabilities?

Facility has OEM approved refinish system?

Facility uses R134a or R1234yr refrigerant recovery/recycling system or has proof of a qualified sublet provider?

Facility has corrosion protection equipment and consumables to restore corrosion protection?

Facility has access to OE repair procedures and proof of compliance?

Facility uses an electronic p-page estimating system?

Facility has a 220 volt, 3-Phase Inverter-Type Squeeze type Resistance Spot Welder (STRSW) capable of 600lbf (270 daN) clamp force and 10,000 amps at electrodes?

Facility has a pulse MIG welder with silicon-bronze MIG brazing capabilities?

Facility utilizes an electronic 3-D measuring system with a current data subscription?

Facility has a documented Quality Assurance system?

Facility has a dent removal system/pulling system for steel panels that contains a stud welder, stud pins, and washers, wiggle wire and pulling attachments?

Facility possesses electronic diagnostic tools able to assess fault codes for pre and post repair vehicle diagnostic scans and proof of calibrations, or has proof of a qualified sublet provider?

ADDITIONAL QUESTIONS FOR CCR CERTIFIED + ALUMINUM LEVEL APPLICANTS:

Facility maintains a separate and isolated aluminum repair space?

Facility has designated set of aluminum-specific tools containing all required hand tools per manufacturer specifications system?

Facility has (220v) Pulse MIG Welder specifically for aluminum components?

Facility has dedicated aluminum dent extraction system containing an aluminum stud welder, heat gun, pyrometer, aluminum hammers, and dent extraction systems?

Facility has specialized aluminum Self-Pierce Rivet (SPR) gun that meets or exceeds manufacturer specifications?

CERTIFICATION

Quick Links

Get In Touch